|
PlusTek NVR4000
|
1ch / 4ch camera input |
|
Full Network Function |
|
Motion Jpeg complete recording and playback |
|
User Friendly System Operation |
|
Quick search / installation |
|
Pre / post alarm recording |
|
5 Languages User interface |
|
Easy S/W upgrade through network |
The perfect solution to your video surveillance
Plustek NVR4000 is a Network Video Motion Recorder, which provides Motion Jpeg recording that connects directly to your network and is manageable through local network area or through the internet. It is easy to install and easy to use.
The Plustek Network Video Recorder, together with Plustek network camera , offers your a comprehensive surveillance solution for detecting shoplifters, reduce false alarms, increase personal safety or view your premises. It is ideal solution for monitoring small shops, gas stations, business hotels and small offices. It support up to 750GB hard disc allowing you to stores data up to about 14days long with VGA resolution at one frame per second from 4 video channel with no degrading in image quality compared to the original image of the camera. Its bundled software application enables simultaneous recording and remote access to live views and playback of recorded image from up to 4 Plustek network camera. Scheduled and triggered recordings speed of up to 120 frames per second in QVGA (320x240 pixels) and QCIF (160x120).
Specification sheet
Hardware specification |
CPU |
|
ARM 9 Based CPU |
Interface |
|
10 / 100 Mbps Ethernet |
Port |
|
4LAN port for Web cameras 1LAN / WAN port for NVR itself |
Hard Disc |
|
One IDE
Ultra ATA133(Support 750G ) |
Memory |
|
8 Flash / 64MB DRAM |
Display |
|
7LEDs: 4 for web cams connection status
1 for LAN/WAN, 1 for HDD, 1 for Power status |
Power |
|
Switch/Button
External Power supply 12VDC 5A |
Reset |
|
Reset Button(Reset to Factory Setting) |
Alarm |
|
Audio Buzzer alarm (for Alarm Notification) |
Dimensions |
|
300mm(L)x152mm(L)x44mm(H) |
|
|
|
Software Application |
System |
|
Linux |
Communication Protocol |
|
TCP / IP, HTTP (Web Services), UPnP (Only for discovering the IGD and open the virtual server), SNTP (for Time & Date), DHCP server / Fixed IP (for Web cams LAN port), DHCP Client / PPPoE / Fixed (for NVR itself ), TETP (for upgrade),
CLI (for console Operating, Used for DEBUG & Factory), SMTP (for Alarm Notification), FTP Clint / server (for Alarm Notification), DDNS (Vendor Dependent) |
Software AP |
|
Motion Jpeg Complete recording, Timing schedule, System check, Quad mode for simultaneous recording, Playback, Search camera, Backup, Motion detection, Multiple language, Alarm triggered FTP, Pre / Post alarm
recording, 4ch View system operation /60fps per VGA: 640x480 hi-quality / 120fps per CIF:320x240 hi-quality and 120fps per QCIF(QQVGA)160x120
hi-quality . |
|
